Why Choose Magic Shield Leather Graphene Ceramic Coating?
Magic Shield Leather Graphene Coating is the future of leather care. Unlike basic conditioners, this formula combines graphene + ceramic technology to clean, condition, and protect your leather while adding a natural, luxurious shine.
![]()
Restores color & suppleness
![]()
Creates a protective barrier against UV, spills & wear
![]()
Prevents cracking, fading & discoloration
![]()
Provides elite 5-year protection

Simple 3-Step Application:
1️⃣ Clean leather surface with included Leather Cleaner.
2️⃣ Apply Graphene Coating evenly using applicator pad.
3️⃣ Buff gently with microfiber — done!.
- Use a second towel for final buff to ensure no residue remains .

Steps

Before You Begin
Prepare Your Vehicle Interior:
Thoroughly vacuum the interior to remove dust and debris.
Clean all leather surfaces using Magic Shield Leather Cleaner to eliminate dirt, oils, and contaminants.
Prepare the Environment:
Park your car in a shaded, dust-free area with a temperature between 15°C and 24°C (60°F–75°F).

Prepare the Leather Coating
Shake the leather coating bottle thoroughly to ensure the formula is evenly mixed.
Replace the bottle cap with the included white tip for controlled application.
Apply 8–10 drops of the coating onto the suede applicator pad.

Apply the Leather Coating
Application Technique: Swipe the applicator pad in straight, overlapping lines (side-to-side or up-and-down) on one section of the leather at a time.
Keep Moisture Consistent: Add a few drops of coating to the suede applicator pad every 2–3 swipes to ensure even application.

Wait Before Buffing
Allow the coating to settle for 3–5 minutes before proceeding to buff.

Buff the Surface
Remove Excess Product: Use a clean, dry microfiber cloth to gently buff the leather.
Technique: Use light, circular motions to achieve a streak-free, smooth finish.
Inspect Thoroughly: Check for high spots or uneven areas and buff as needed.

Allow the Coating to Cure
Initial Curing: Let the coating sit undisturbed in a temperature-controlled environment for at least 4 hours.
Full Curing: Avoid water, debris, or physical contact with the surface for a full 24 hours to ensure proper bonding.
Reapply if Necessary: If high spots are visible after curing, correct them by lightly reapplying and buffing the area within 2 hours.

Tips for Best Results
Always work in a well-ventilated area.
Use clean and dry microfiber towels to prevent scratches or streaks.
Avoid applying the coating on hot surfaces or in direct sunlight.


You can get the following products
![]()
1 × Leather Cleaner Bottle (100ml / 3.4oz)
![]()
1 × Leather Graphene Coating Bottle (30ml / 1oz)
![]()
Applicator pad & microfiber towel
![]()
Instructions for use
![]()
Ongoing support via chat or email
Why Choose Magic Shield Leather Graphene Ceramic Coating?
Will it change the look of my leather?
No — it enhances natural shine without greasy residue.
How long does it last?
Up to 5 years of durable protection with proper care.
Is it safe on all leather?
Yes — suitable for all smooth leather surfaces (not suede or nubuck).
Does it prevent cracking?
Yes — creates a flexible shield that locks in moisture and resists UV damage.
Can I use it on steering wheels or bags?
Absolutely — perfect for seats, wheels, furniture, shoes & more.
Why Choose Magic Shield Leather Graphene Ceramic Coating?
Magic Shield Leather Graphene Coating is the future of leather care. Unlike basic conditioners, this formula combines graphene + ceramic technology to clean, condition, and protect your leather while adding a natural, luxurious shine.
![]()
Restores color & suppleness
![]()
Creates a protective barrier against UV, spills & wear
![]()
Prevents cracking, fading & discoloration
![]()
Provides elite 5-year protection

Simple 3-Step Application:
1️⃣ Clean leather surface with included Leather Cleaner.
2️⃣ Apply Graphene Coating evenly using applicator pad.
3️⃣ Buff gently with microfiber — done!.
- Use a second towel for final buff to ensure no residue remains .

Steps

Before You Begin
Prepare Your Vehicle Interior:
Thoroughly vacuum the interior to remove dust and debris.
Clean all leather surfaces using Magic Shield Leather Cleaner to eliminate dirt, oils, and contaminants.
Prepare the Environment:
Park your car in a shaded, dust-free area with a temperature between 15°C and 24°C (60°F–75°F).

Prepare the Leather Coating
Shake the leather coating bottle thoroughly to ensure the formula is evenly mixed.
Replace the bottle cap with the included white tip for controlled application.
Apply 8–10 drops of the coating onto the suede applicator pad.

Apply the Leather Coating
Application Technique: Swipe the applicator pad in straight, overlapping lines (side-to-side or up-and-down) on one section of the leather at a time.
Keep Moisture Consistent: Add a few drops of coating to the suede applicator pad every 2–3 swipes to ensure even application.

Wait Before Buffing
Allow the coating to settle for 3–5 minutes before proceeding to buff.

Buff the Surface
Remove Excess Product: Use a clean, dry microfiber cloth to gently buff the leather.
Technique: Use light, circular motions to achieve a streak-free, smooth finish.
Inspect Thoroughly: Check for high spots or uneven areas and buff as needed.

Allow the Coating to Cure
Initial Curing: Let the coating sit undisturbed in a temperature-controlled environment for at least 4 hours.
Full Curing: Avoid water, debris, or physical contact with the surface for a full 24 hours to ensure proper bonding.
Reapply if Necessary: If high spots are visible after curing, correct them by lightly reapplying and buffing the area within 2 hours.

Tips for Best Results
Always work in a well-ventilated area.
Use clean and dry microfiber towels to prevent scratches or streaks.
Avoid applying the coating on hot surfaces or in direct sunlight.


You can get the following products
![]()
1 × Leather Cleaner Bottle (100ml / 3.4oz)
![]()
1 × Leather Graphene Coating Bottle (30ml / 1oz)
![]()
Applicator pad & microfiber towel
![]()
Instructions for use
![]()
Ongoing support via chat or email
Why Choose Magic Shield Leather Graphene Ceramic Coating?
Will it change the look of my leather?
No — it enhances natural shine without greasy residue.
How long does it last?
Up to 5 years of durable protection with proper care.
Is it safe on all leather?
Yes — suitable for all smooth leather surfaces (not suede or nubuck).
Does it prevent cracking?
Yes — creates a flexible shield that locks in moisture and resists UV damage.
Can I use it on steering wheels or bags?
Absolutely — perfect for seats, wheels, furniture, shoes & more.
No — it enhances natural shine without greasy residue.
Up to 5 years of durable protection with proper care.
Yes — suitable for all smooth leather surfaces (not suede or nubuck).
Yes — creates a flexible shield that locks in moisture and resists UV damage.
Absolutely — perfect for seats, wheels, furniture, shoes & more.

Perfect For:
- Car seats & interiors .
- Leather steering wheels.
- Shoes, handbags, wallets.
- Leather furniture

Not For:
- Suede or nubuck.
- Application on wet or dirty surfaces.

Detailing Combo System
- Leather Cleaner – Deep clean & prep.
- Leather Graphene Coating – Protect & condition.
- Enjoy 5+ years of protection.
Four core highlights of Leather Graphene Ceramic Coating
Brings life back to tired, cracked, or faded leather.
1.Repairs dryness.
2.Removes dirt buildup.
3.Prevents cracking.

Long-Lasting 5-Year Protection
Stronger than traditional leather conditioners.
1.UV shield.
2.Scratch resistance.
3.Moisture barrier.

Deep Cleaning + Natural Conditioning
Keeps leather smooth, supple, and soft to the touch.
1.Removes embedded dirt.
2.Restores natural feel.
3.Non-greasy finish.
Creates a flexible shield that outperforms wax or oils.
1.Graphene durability.
2.Ceramic gloss.
3.Professional-grade protection.
Real Customer Results




























Professional detailer here. This is a high-profit add-on for my clients. The claim of “Up to 5 Years Protection” is a huge selling point. The Graphene/Ceramic hybrid technology makes the leather hydrophobic—coffee spills just bead up and roll off.
The “Foam Cleaner” included in the box is amazing on its own. It pulled so much dirt out of my steering wheel before I even applied the coating. The coating itself sealed in that clean look. Now my steering wheel doesn’t get sticky on hot days.
I used this on my 10-year-old BMW seats that were looking cracked and faded. It didn’t “fix” the physical cracks (obviously), but it darkened the leather and made the cracks much less visible. It restored the color beautifully. I’m giving 4 stars because the 30ml bottle looks small, but it was actually enough to do my whole sedan.
5 stars. The kit is complete. The cleaner works great and the coating goes on easy.
Finally, a leather product that isn’t greasy! I hate those cheap conditioners that make your steering wheel slippery. This Graphene Coating dries to a perfect matte finish. It makes the leather feel soft and protected, like a brand new high-end bag.